Tuscany Faux Wood Ceiling Beams

Description

Our Artisan Series Faux Wood Ceiling Beams represent our most versatile solution for completing a decorative ceiling beam treatment.

Artisan Series Beams are fabricated with mitered corners to create 2-Sided, 3-Sided or 4-Sided Beams. This process allows us to offer an extensive range of Sizes & Lengths in all of our Textures (Including Smooth) and in any of our pre-finished Stain Colors or just Primed.

These lightweight, Artisan Series Faux Wood Ceiling Beams, install Quickly & Easily in just a few simple steps.

Features & Benefits

FEATURES:

Manufactured in Any Size Combination of:
(4″ – 30″)W x (4″ – 30″)H x (4ft – 30ft)L
Cast from Natural Wood to Replicate Exact Detail
Available in 6 Textures & 6 Stain Colors
Factory Primed or Pre-Finished in Wood Stain
Cut & Fasten Easily w/ Standard Tools & Fasteners
Smooth Texture Available in a Primed Finish
End Cap & Corbel Options Available
Waterproof

BENEFITS:

More Cost Effective Than Real Wood
Lightweight & Dimensionally Stable
75% Labor Savings Versus Site-Built Methods
Will Not Rot, Crack, Warp, Split or Cup
Quick & Easy to Install
Maintenance Free
Fire Rated Option Available
Made in the USA to Support Our Economy

Specifications

GENERAL:

Factory Assembled, Mitered Corner Construction

APPLICATIONS:

Interior
Exterior (Waterproof)
Ceiling Decor
Wall Decor

MATERIAL TYPE:

High Density Urethane (HDU) Foam

MATERIAL THICKNESS:

1″

SIZING:

AVAILABLE SIZES
(4” – 30”)W x (4” – 30”)H in 1” increments
AVAILABLE LENGTHS
48″ (4ft) – 360″ (30ft) in 1ft increments
Longer lengths are possible and must be Custom Quoted
OUTSIDE DIMENSIONS (OD)
All Width & Height Sizes listed in the options menu are of the visible Outside Dimensions (O.D.) of the Beams. These are the sizes used when ordering any of our Ceiling Beams.
INSIDE DIMENSIONS (ID)
To calculate, subtract 1″ from the Beams exterior dimensions for each side to determine its interior dimensions.

For Example:

A 3-Sided Beam with Outside Dimensions (OD) of 10″W x 10″H will have Inside Dimensions (ID) of 8″W x 9″H calculated as follows:

- - - 10″W minus 1″ for each of the two vertical sides = 8″W
    - 10″H minus 1″ for the one horizontal bottom side = 9″H

FINISH TYPE:

100% VOC Free
Primed or Pre-Finished
Satin Sheen

FINISHING PROCESS:

Spray Applied in a Dust Free Environment

WEIGHT (Most Common Sizes):
(All Weights are Approximate)

6”W x 4”H = 1.5 lbs per ft
6”W x 6”H = 1.8 lbs per ft
8”W x 6”H = 2 lbs per ft
8”W x 8”H = 2.4 lbs per ft
10”W x 8”H = 2.5 lbs per ft
10”W x 10”H = 3 lbs per ft

How to Install

INSTALLATION VIDEO:
In this video, you’ll gain a complete understanding of our simple Faux Wood Ceiling Beam installation process in just under 5 minutes.

INSTALLATION PROCESS:
Tilton Faux Wood Ceiling Beams install faster, easier and with greater precision than ANY conventional method for installing real wood beams.

STEP 1:
Measure and Mark

Measure and mark the beam locations on the ceiling (shown in blue)

TOOLS NEEDED FOR THIS STEP:

How to Install Faux Wood Ceiling Beams

STEP 2:
Secure the Fastening Cleats

Secure the Fastening Cleats continuously along each of the chalk lines made in Step 1

TOOLS NEEDED FOR THIS STEP:

how to install faux beams

STEP 3:
Cut and Install the Faux Wood Beams

Cut to length and install all of the Faux Wood Beams with the full length beams installed first and the shorter sections fit between them.

TOOLS NEEDED FOR THIS STEP:

how to install ceiling beams

INSTALLATION MANUAL:
This manual provides all the information and illustrations you’ll need to prepare the ceiling area and secure the Faux Wood Ceiling Beams for a superior fit and finish!