Our Assembled Series Faux Wood Ceiling Beams represent our most versatile solution for completing a decorative ceiling beam treatment.
Assembled Series Beams are fabricated with mitered corners to create
, 2-Sided 3-Sided or 4-Sided Beams. This process allows us to offer an extensive range of Sizes & Lengths in all of our Textures (Including Smooth) and in any of our pre-finished Stain Colors or just Primed.
These lightweight, Assembled Series Faux Wood Ceiling Beams, install Quickly & Easily in just a few simple steps.
Specifications GENERAL: Factory Assembled, Mitered Corner Construction APPLICATIONS: Interior Exterior (Waterproof) Ceiling Decor Wall Decor MATERIAL TYPE: High Density Urethane (HDU) Foam MATERIAL THICKNESS: SIZING: AVAILABLE SIZES (4” – 30”)W x (4” – 30”)H in 1” increments AVAILABLE LENGTHS 48″ (4ft) – 360″ (30ft) in 1ft increments Longer lengths are possible and must be Custom Quoted OUTSIDE DIMENSIONS (OD) All Width & Height Sizes listed in the options menu are of the visible Outside Dimensions (O.D.) of the Beams. These are the sizes used when ordering any of our Ceiling Beams. INSIDE DIMENSIONS (ID) To calculate, subtract 1″ from the Beams exterior dimensions for each side to determine its interior dimensions. For Example:
A 3-Sided Beam with Outside Dimensions (OD) of 10″W x 10″H will have Inside Dimensions (ID) of 8″W x 9″H calculated as follows:
10″W minus 1″ for each of the two vertical sides = 8″W 10″H minus 1″ for the one horizontal bottom side = 9″H FINISH TYPE: 100% VOC Free Primed or Pre-Finished Satin Sheen FINISHING PROCESS: Spray Applied in a Dust Free Environment WEIGHT (Most Common Sizes):(All Weights are Approximate) 6”W x 4”H = 1.5 lbs per ft 6”W x 6”H = 1.8 lbs per ft 8”W x 6”H = 2 lbs per ft 8”W x 8”H = 2.4 lbs per ft 10”W x 8”H = 2.5 lbs per ft 10”W x 10”H = 3 lbs per ft How to Install INSTALLATION VIDEO:In this video, you’ll gain a complete understanding of our simple Faux Wood Ceiling Beam installation process in just under 5 minutes. VIDEO This manual provides all the information and illustrations you’ll need to prepare the ceiling area and secure the Faux Wood Ceiling Beams for a superior fit and finish! INSTALLATION MANUAL: End Cap Styles
Available options to finish the ends of your Ceiling Beams when they don’t terminate into a perpendicular surface or into other Beams.
END CAPS:Add a Square End Cap to one or both ends of your Ceiling Beams
CORBEL ENDS:Choose from a wide variety of decorative Corbel End Styles for one or both ends of your Ceiling Beams
CORBEL END STYLES:Corbel A = Any Style #COR-A XX Corbel B = Any Style #COR-B XX Corbel C = Any Style #COR-C XX
Click to Enlarge
Faux Wood Ceiling Beams Gallery