FREE INSTALLATION KIT Included! Our Molded Series Faux Wood Beams represent our most cost effective solution for completing a decorative ceiling beam treatment.
Molded Beams are cast from natural wood forms to create their seamless, 3-Sided ‘U’ shape. They’re available in our Douglas Fir, Hand Hewn, Old World, Rough Sawn and Rustic Timber Textures, in a variety of popular Sizes, Lengths and Colors. They’re also available Primed if you prefer to paint or stain them yourself.
These lightweight, 3-Sided, Molded Series Faux Wood Ceiling Beams, install Quickly & Easily in just a few simple steps.
Features & Benefits
FREE INSTALLATION KIT:
As an Added Value, these Molded Series Beams include a FREE Installation Kit containing all of the materials required for standard applications when following our recommended Installation Process. This will ensure the successful completion of your project without any headache or hassle.
*All Sizes listed are of the visible Outside Dimensions (O.D.) of the Beams. These are the sizes used when ordering any of our Ceiling Beams. All Weights are approximate.
INSIDE DIMENSIONS (I.D.)
See the Section Drawings below for the Interior Dimensions (I.D) of the Hand Hewn Molded Series Beams. All Interior Dimensions are approximate and may vary slightly.
(Click Any Drawing to Enlarge)
TEXTURE:
Hand Hewn
FINISH & COLOR OPTIONS:
Primed – Off-White
Stained – Dark Walnut
Stained – Driftwood
Stained – Espresso
Stained – Gray
Stained – Ledgewood
Stained – Light Walnut
Stained – Mahogany
Stained – Oak
FINISH TYPE:
100% VOC Free
Satin Sheen
FINISHING PROCESS:
Spray Applied in a Dust Free Environment
PACKAGING & SHIPPING:
Palletized for Nationwide Shipment via LTL Freight Carrier
Small Orders – Boxed for Nationwide Shipment via Parcel Post (UPS/FedEx)
Color Chart
The chart below shows the Colors our Hand Hewn, Molded Series Faux Wood Beams are available in.
(Click Any Image to Enlarge)
Primed
Dark Walnut
Espresso
Gray
Light Walnut
Mahogany
Oak
How to Install
INSTALLATION VIDEO: In this video, you’ll gain a complete understanding of our simple Faux Wood Ceiling Beam installation process in just under 5 minutes.
INSTALLATION PROCESS: Tilton Faux Wood Ceiling Beams install faster, easier and with greater precision than ANY conventional method for installing real wood beams.
STEP 1: Measure and Mark
Measure and mark the beam locations on the ceiling (shown in blue)
TOOLS NEEDED FOR THIS STEP:
STEP 2: Secure the Fastening Cleats
Secure the Fastening Cleats continuously along each of the chalk lines made in Step 1
TOOLS NEEDED FOR THIS STEP:
STEP 3: Cut and Install the Faux Wood Beams
Cut to length and install all of the Faux Wood Beams with the full length beams installed first and the shorter sections fit between them.
TOOLS NEEDED FOR THIS STEP:
INSTALLATION MANUAL: This manual provides all the information and illustrations you’ll need to prepare the ceiling area and secure the Faux Wood Ceiling Beams for a superior fit and finish!
Click the "Save Cart & Generate Link" button below. Then copy and paste the link into an email to yourself and/or others to retrieve it at any time during the next ninety (90) days.
Back
Save & Share Cart
Enter the required info below and click the "Share Cart" button to have us review your cart and/or verify the best current shipping rate for your Beam or Plank order.
Jason Tilton
