AN ALL INCLUSIVE SYSTEM
Every Tilton Box-Beam Coffered Ceiling System is priced and packaged as an All-Inclusive product that contains the following pre-assembled and separate components and materials to allow you to completely finish each installation without the need to factor for, source or purchase ANY additional materials:
1. Coffer Modules
Included as fully pre-assembled units with integrated ceiling panel, beam walls and crown moldings already installed
2. Nailer Boards
Included as loose material to be trimmed to length and fastened to the perimeter of the room during the installation process
3. Beam Boards
Included as loose material to be trimmed to length and fastened to the bottom edges of the coffer modules during the installation process
4. Perimeter Molding
Included as loose material to be trimmed to length and fastened to the perimeter of the system during the installation process
5. Adjustable Lag Screws
Included in bulk quantity and inclusive of the required specialty driver/adjuster bit.
6. Installation Manual
Included as a printed document and may also be downloaded and viewed here on our site
Additionally every Tilton Box-Beam Coffered Ceiling System includes Customized CAD drawings completed to scale with all critical dimensions listed to help you and/or your client visualize and approve your order prior to production:
CAD drawings are provided at no additional charge upon receipt of deposit for your order. However, if the drawings are needed prior to placing your order an up-front drafting fee will be required. Any up-front drafting fees will be applied towards the total cost of your ceiling system at the time of order, but are otherwise non-refundable.